|
Design
Beam profile
Valtra front loaders offer great torsional and bending
rigidity. All loader models have double U-profile beams with
70 mm wide profiles. The welded seams are facing to the
inside, which contributes to the loader’s clear and smooth
beam design. All hydraulic pipes and hoses are located
inside the beam preventing them from dirt or damage through
sharp objects.
Loader beam and cross tube
The curved cross tube is situated towards the front of the
loader, thus allowing excellent visibility and enough room
for the Valtra front linkage. At the same time it is also
possible to attach a larger loader closer to the cab, thus
achieving better weight distribution for the tractor-loader
unit and improving overall handling.
The reinforcement plates between cross tube and the beam
sides add to the strength and durability of the loader.
Inside and behind the cross tube, there are hydraulic hoses,
the centrally located distribution valve and the load shock
absorber (SoftDrive).
Tool Box
A practical toolbox is located behind the protective cover
of the cross tube.
Galvanised pins
All pins are galvanised and of great strength. The pins
on the tool carrier all have a diameter of 40 mm, because
they are under the greater stress there.
Greasing points
All greasing points face outwards and have removable
covers, allowing for safe lubrication without spilling
lubrication grease on bonnet, windows or clothes.
Support legs
The support legs can be released without having to
handle tools or loose parts. Simply pull the large hinged
support feet upwards to fold out the support legs.
|
