| Link to mainpage | ||
 |
||
|
New Tractors |
||
|
||
| Valtra N Series | ||
 |
||
|
Main NEW! N82 and N92 Engine Models Transmission Hydraulics Cab Options Frontloaders Technical Specifications |
||
|
Optional equipment for Valtra N models |
||
 |
Front PTO Front PTO, available as an option fitted on the production line is only available with the front linkage, is rated at 1000rpm and activated electro hydraulically by a switch on the right-side panel within the cab. The front axle suspension can be fitted together with the front PTO and a front loader. |
|
 |
Front linkage The lift capacity of the front linkage is 3600kg (N101-N141) and 2500 kg (N82-92). The front linkage can be fitted with a 1000 rpm front PTO, depending on farm or contracting requirements. Using implements attached to both ends of the tractor significantly increases working efficiency and productivity. For the models N101-N141 the front linkage can also be specified with front axle suspension. |
|
 |
Front axle suspension (N101-N141) Valtra’s hydro pneumatic front axle suspension significantly increases driving comfort on roads or in the field. Either operating with trailers or mounted equipment allowing fast, safe and comfortable journeys across a variety of terrain and surfaces. On field work the front suspension can significantly increase pulling efficiency, and may be switched on and off from the cab as required. |
|
 |
Cruise control Cruise control is a useful option for many types of operation, increasing both driver comfort and work efficiency. The driver sets the desired driving or PTO speed. This pre-set speed is then maintained automatically regardless of changes in load. When turning on the headland or stopping work, the speed can be temporarily returned to idle or a pre-set speed at the push of a button. The working speed is then regained automatically by pushing the cruise button again. Cruise control makes routine work simpler and faster while quality and productivity are also improved. |
|
 |
Valtra ISOBUS – Controlling implements is easier than
ever ISOBUS is a standardised system for communicating and sharing data between the tractor and implement. A Virtual Terminal inside the cab is used to control implements and to display input and save information. ISOBUS makes it easy to control modern implements, especially those with many features and a high level of automation. The number of ISOBUS implements on the market is increasing rapidly. |
|
 |
Valtra front loaders Depending on the model of tractor, the front loader can be controlled using either the electronic proportionally controlled joystick on the armrest or with a mechanically operated ErgoDrive control. Valtra front loaders -pages |
|
