The Valtra F Series is the perfect tractor for specialist jobs such as fruit farms and vineyards. It’s between 1.3 and 1.8 m wide, making it ideal for the narrow passages between your most valuable fruit crops. The specially shaped chassis combined with a front axle enable a 55-degree wheel angle. Tight turns are possible with a 3.6 m radius. The Valtra F Series is a compact machine and its powerful hydraulics allow the use of equally effective implements to make the F Series your working machine for specialist use.
The Valtra F Series comes in three main versions. You can choose a tractor with or without a cab (1.5 - 1.8 m width) or go for the narrow model (1.3 - 1.5 m width) to fit through tighter spaces. Without the cab and with rollover protective structure (ROPS) the machine can be as low as 1.4 m. It is a compact model perfect for the tightest of spaces. To get the perfect fit, a good selection of 24” and 28” rear wheels are available, with corresponding 16” to 20” front wheels.
The F Series is the perfect combination of a small sized tractor and powerful hydraulics to meet the demands of specialised cultivation. The Valtra F Series can be equipped with two or three hydraulic pumps and up to four implement valves. Flow control and mid-mounted quick couplers are available. The F Series has up to three tons power lift capacity.
Special jobs require a large number of speeds. The cost effective mechanical 24 + 24R transmission with synchromesh shuttle offers the right speed for every task. If more comfort and efficiency is needed, the power shuttle 24 + 12R transmission with power shift gear is the right choice. It makes the tractor easy to operate in any work situation.
The cabs are perfectly suited for specialist crop operations. They are easy to access and comfortably ergonomic with air-con, great visibility and controls on the right-hand side. Pneumatic and mechanically suspended seat options are also available. Although compact in size, the cab still offers comfort and operating room for long and efficient workdays.
|Model||Engine||Cylinders/volume||Emission regul. according||Output max||1.3m narrow cab||1.3 standard cab or rops||Transmission options|
|Mechanical shuttle||Power shuttle|
With 2 PS
|F75||FPT - F34||4 / 3.4 litre||EU Stage 3B||75||55||320||Opt.||Opt.||24+24R||24+12R|
|Model||STD - ROPS||Narrow (Cab)||STD - Cab|
|Weight without driver and without front ballasts [kg]||2810||3040||3150|
|Maximum vehicle weight [kg]||4400|
|Fuel tank capacity [L]||74||74||74|
|Extra fuel tank [L]||30||n.a.||30|
|PTO nominal speed at engine speed (2 speed PTO)||540: 1938 1/min ; 540E: 1648 1/min ; 1000: 1962 1/min|
|GSPTO speeds: PTO turns for one rotation of rear wheel||540: 9.077; 540E: 10.670; 1000: 16.605|
|Front axle differential lock||Limited slip|
|Transport length [mm]||3950||3950||3950|
|Tractor width, nominal (real, at narrowest with smallest tyres) [mm]||1500 (1544)||1300 (1278)||1500 (1544)|
|Tyre size corresponding to measures below||300/70R20 (F) / 420/70R28 (R)||280/70R18 (F) /380/70R28 (R)||300/70R20 (F) / 420/70R28 (R)|
|Height cab [mm]||2478||2478|
|Height ROPS up /down [mm]||2653 / 1400|
|Ground clearance [mm]||270||250||270|
|Track width, rear, min /max [mm]||1114 / 1514||955 / 1359||1114 / 1514|
|Tractor width mudguard to mudguard, external (rear, no wideners) [mm]||1450||1080||1450|
|Axle width, FRONT, flange to flange [mm]||1326||990||1326|
|Axle width, REAR, flnage to flange [mm]||1234||972||1234|
|Standard open with ROPS||Narrow cab||Standard cab|
|Open operating station (ROPS)||Narrow cab model||Standard cab model|
|Nominal width 1.5 m||Nominal width 1.3 m||Nominal width 1.5 m|
|Low and compact for fruit farms||Right size for vineyards||Right size for fruit farms|
|Lowest point 1.4 m (ROPS down)||Cab model only|